CrossFit Discussion Board  

Go Back   CrossFit Discussion Board > CrossFit Forum > Equipment
CrossFit Home Forum Site Rules CrossFit FAQ Search Today's Posts Mark Forums Read

Equipment Outfitting a serious gym. Vendors & suppliers. Devices & equipment

Thread Tools
Old 07-24-2003, 07:01 PM   #1
Posts: n/a
I saw at one stage plans on how to make rings, but i can find the post now, can anyone help me out?

  Reply With Quote
Old 07-24-2003, 07:24 PM   #2
Lauren Glassman
Posts: n/a
I think this is what you are looking for:
  Reply With Quote
Old 07-27-2003, 09:44 PM   #3
Posts: n/a
Thankyou Lauren

Had an idea to make rings from rope coled and then fibre glassed as i dont have equipment to make them from wood, any feed back appreciated before i start.

  Reply With Quote
Old 07-28-2003, 07:51 AM   #4
Roger Harrell
Affiliate Roger Harrell is offline
Roger Harrell's Avatar
Join Date: Jun 2004
Location: San Rafael  CA
Posts: 2,318
I don't know too much about the structural properties of fibre glass, but with a rope as the core, the compression forces on the inner side of the bottom of the ring would be pretty heafty. I am not sure that fibre glass would hold up to this over time.
  Reply With Quote
Old 09-23-2003, 11:06 AM   #5
John Shannon
Posts: n/a
What about using rowing handles and climbing rope? I thought about using mil spec paracord at 500 # strength.
  Reply With Quote
Old 09-30-2003, 06:15 AM   #6
Gunnar Bozeman
Posts: n/a

I think muscle ups will be much harder and more painfull with the york handles. The square shape is going to make a false grip about impossible. You would be better off using metal playground rings than the york handles; granted you need small hands for playground rings (6" dia.).
For push ups and pull ups, the york handles should work fine.

  Reply With Quote
Old 10-01-2003, 05:24 AM   #7
David Heyer
Member David Heyer is offline
Join Date: Mar 2003
Location: Ashland  PA
Posts: 151
I have a set of rings that I had a welder make for me that I have mounted, but I also have a home-made "traveling" set that I made from nothing more that rope and THICK hose.
It is very easy and cheap. To make this set, I took a 20' 1/2" nylon rope, and cut three 16" pieces of thick hose. I then pushed the rope through each piece of hose. One section is placed in the middle with a simple knot tied on each end to keep it from moving (this prevents wear and tear on the rope from whatever you use it on), and the other two pieces near the ends. I then tied off each end forming a large C with the hose.
To use, I find a swing set, tree branch, etc. throw it over and I have a set of rings.
They are actually really good compared to my permanent rings. They are light-weight, easy to transport, and can be placed anywhere.
I got the hose from a contractor who was throwing it away. I wouldn't use the garden hose type for this. Get contractor quality hose, and make sure it is really thick/strong.
  Reply With Quote
Old 10-10-2003, 05:50 AM   #8
Graham Hayes
Member Graham Hayes is offline
Join Date: Sep 2003
Location: Sidmouth  Devon
Posts: 880
I've been using a couple of judo belts thrown over a doorway chinning bar and tied at the bottom very tightly. It's really unstable and has your muscles shaking a lot. I now see why ring dips are to bar dips, what squats are to leg presses.
  Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Home made rings from PVC Paul LaDuke Equipment 13 07-14-2007 04:46 AM
Home made rings Joe Marsh Equipment 1 02-16-2007 07:58 PM
Home made rings *photo* Mark Dowst Equipment 6 10-05-2006 03:26 PM
Home made detachable rings Mark Garcia Equipment 0 06-27-2006 12:48 AM
Home made rings Thomas Beasley Equipment 4 05-28-2006 05:10 PM

All times are GMT -7. The time now is 09:38 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
CrossFit is a registered trademark of CrossFit Inc.