CrossFit Discussion Board  

Go Back   CrossFit Discussion Board > CrossFit Forum > Equipment
CrossFit Home Forum Site Rules CrossFit FAQ Search Today's Posts Mark Forums Read

Equipment Outfitting a serious gym. Vendors & suppliers. Devices & equipment

Thread Tools
Old 10-14-2005, 07:28 AM   #11
John Phipps
Member John Phipps is offline
Join Date: Jul 2004
Location: St Louis  MO
Posts: 158
Good point Larry. It is hard enough for me to get through the WOD without the equiptment beating me up as well. I will try to make a slope-sided box this weekend.

Last night for "Kelly" I did "stump jumps". I have two logs that I haven't split that are around 20" high and 18" to 20" round. A bit unstable but it was available.
  Reply With Quote
Old 10-14-2005, 05:01 PM   #12
Beth Moscov
Member Beth Moscov is offline
Join Date: May 2007
Location: Boulder Creek  CA
Posts: 1,269
The problem with BFS is that the shipping on the boxes is almost as high as the cost of the boxes. Or so I recall. That could have changed.

I like the angled sides because they can stack neatly that way. The next on top of each other very easily.
  Reply With Quote
Old 10-15-2005, 10:09 PM   #13
Nikki Young
Member Nikki Young is offline
Nikki Young's Avatar
Join Date: Sep 2005
Location: Canberra  ACT
Posts: 458

I was wondering how you went with building some outdoor pull-up bars?? If things went well would i be able to grab some instructions/measurments ect from you??
  Reply With Quote
Old 10-18-2005, 12:29 PM   #14
Jonathan Kessler
Member Jonathan Kessler is offline
Join Date: Aug 2004
Location: Boulder Creek  CA
Posts: 251
JK here (the guy who built Beth's bars)
Regarding the pullup bars - sorry, that's classified information, we don't provide that to Aussies' for fear of upsetting the kangaroos.
Seriously, I'll post that on the "Outdoor pullup bars" thread so as not to Hijack Lincoln's cool plyoboxes (which we'll be building soon!)
I love the sharing of information here.
Thanks, Lincoln!!

  Reply With Quote
Old 10-18-2005, 04:00 PM   #15
Clay Jones
Departed Clay Jones is offline
Join Date: Jan 1970
Posts: 672
Lincoln, any reason in particular you went with maple plywood? Was it a matter of having a better finish, or is maple stronger?

Great looking boxes, BTW.
  Reply With Quote
Old 10-18-2005, 05:28 PM   #16
Lincoln Brigham
Member Lincoln Brigham is offline
Lincoln Brigham's Avatar
Join Date: May 2003
Location: Kirkland  WA
Posts: 3,987
Better quality wood. Harder surface, less voids in the ply, less knotholes, holds screws better. It really tore up my saw blade too. The wood was actually from the center section from my old Olympic weightlifting platform, so I know it's durable!
  Reply With Quote
Old 10-27-2005, 09:32 AM   #17
Charley Allen
Member Charley Allen is offline
Join Date: Oct 2005
Location: Houston  TX
Posts: 3

How did you determine the proper angle to use at the top edge and bottom edge in order to make a sloped box?
  Reply With Quote
Old 10-28-2005, 07:28 AM   #18
Lincoln Brigham
Member Lincoln Brigham is offline
Lincoln Brigham's Avatar
Join Date: May 2003
Location: Kirkland  WA
Posts: 3,987
Cardboard mockup (first photo). Then I just set the saw blade angle to match.
  Reply With Quote
Old 03-24-2010, 02:16 PM   #19
Jesse Mattson
Member Jesse Mattson is offline
Jesse Mattson's Avatar
Join Date: Mar 2010
Location: Portland  OR
Posts: 7
Re: My plyo box project.

I know this is an old thread, but I wanted to say I used it as a guide to build my own today. Thanks for the info!

It took about an hour. I used 3/4" plywood, 2" deck screws, and heavy-duty wood glue. Tools were: circular saw, jig saw, & drill. I skipped the cardboard part because I have built many things out of wood before.

Also, 1 4x8 piece of plywood is enough for two 18" boxes.
  Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Plyo Box Kevin Burns Equipment 3 03-16-2007 07:10 PM
Kelly' Grafton Trail Run project Kelly Moore Workout Logs 14 11-25-2006 04:11 PM
20 in Plyo Box for $28 Matthew Nielsen Equipment 21 09-06-2006 04:02 PM
Project Fit City Kevin Rogers Fitness 7 05-01-2006 10:54 AM
Fixed gear project questions.... Bob Pratt Equipment 3 02-06-2006 12:49 PM

All times are GMT -7. The time now is 07:13 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
CrossFit is a registered trademark of CrossFit Inc.