View Single Post
Old 10-10-2012, 08:09 AM   #2
Jon Gilson
Affiliate Jon Gilson is offline
Jon Gilson's Avatar
Join Date: Sep 2006
Location: Boston  MA
Posts: 814
Re: ATTN: AF Home Pull Up Bar owners.


I can help.

The Again Faster Home Pullup Bar ceiling footprint is 26 x 26 x 50, and mounting hardware is included.

It's meant to mount to studs 48" apart, which is consistent with 16" on-center stick construction garages, the industry standard.

As long as you hit the studs with the included lag bolts, it's rock solid. We don't sell anything that doesn't stand up to CrossFit movements; the whole company is based around serving the CF Community.

The bar itself is just over 1" OD, and can be mounted 14 or 26 below the ceiling. It goes into the bracket, and then is bolted in, all the way through the bar. There's a hole in both the bracket, the upright, and the bar itself to accommodate this.

Regarding your question on our Facebook page, you can totally mount the bar at a 30-degree angle. Again, hit the studs, and assuming your garage is stable, you'll have no issues.

If you have any other questions, just hit us up at 617 460 5999 or We're open M-Thurs from 9a to 8p, and Friday from 9a to 5p.

Hope that helps!


Jon Gilson
Owner, Again Faster
"Good intentions are no excuse for incompetence." -Peter Drucker
  Reply With Quote