Here is it sans pics:
For the past couple of years the amount of time I can commit to training has been severely curtailed. My business life literally runs from about 8:15 A.M. to 9 P.M. (or later) six days per week. I have thus been relegated to primarily training on Wednesday evenings and Sunday mornings (I will sometimes get in late mini-workouts in my basement).
As you may know I am a huge advocate of Louie Simmons’ Westside training methodologies (www.westside-barbell.com
). The Westside program when properly adhered to calls for at least four training days per week. Mini workouts to add additional volume (especially for weak points) are also indicated and can be done on otherwise “off” days. Following this protocol is optimal, but not viable due to work and other life considerations for many individuals interested in increasing their absolute size, strength, or both.
I don’t promote excuses or weakness. Many people who claim they can only find the time to train once or twice per week simply lack the will to do what must be done. With that said, there are some people who truly cannot devote more time to their training and yet want to see results. For those of you who are in this category, take heart, it CAN be done. In fact, it has been done at the highest level. I remember reading some time ago that one of the greatest strength athletes in history, Jon Cole, trained twice per week at his peak. Jon set powerlifting records that stood for 40 years!
If Jon did it, so can YOU. Well, not set records that stand for 40 years, but get darn big and strong training only twice per week. The key is the right mix of intensity, volume, and exercise selection.
For the purposes of this article I am going to focus on a blend of size and strength. What follows will provide you the information you need to train twice per week and add both lean muscle mass and strength.
Total Body Sessions
When your training time is limited to two sessions per week it is imperative that you hit all of the major muscle groups each session. Training the total body in one session requires a low volume of work by body part. As the target reader of this article has a severely curtailed amount of training time, the length of a given session is necessarily short. Even if one had more time, sessions much in excess of an hour have been shown to produce diminishing returns (hormonal and other considerations being the presumed culprits). The good news is that despite what you may have read and heard, given a proper level of intensity and mix of rep schemes etc. the actual amount of volume required to add size and strength is much less than commonly accepted.
Prescribed volume for the vast majority of trainees on a twice per week system is 2-5 working sets by body part/group. Working sets are defined as post-warm-up work. See below for more specific recommendations:
Chest – 3-5 sets
Upper back – 3-5 sets
Whole body movements such as squats and deadlifts – 2-5 sets
Accessory work – 2-4 sets
Each of the above sets should be taken to near concentric failure (concentric failure defined as the inability to complete a rep). Rep counts should be varied targeting absolute strength with reps in the 1-3 range, and then following up with higher repetitions to promote growth of the contractile myofibrils and conditioning/thickening of the connective tissues. Here is a sample chest workout to illustrate this concept:
* Only working sets will be noted. The set and rep scheme will be presented in this fashion – 4 x 3/3/12/12 – this indicates four working sets of 3 reps for the first and second sets to be followed by 12 reps each for the third and fourth sets.
Floor Press: 3 x 1/5/12
Incline Press: 2 x 8/15
In the case above the floor press is the primary movement of the day. After an appropriate (specific to the individual) warm-up the first working set is a training one rep maximum/near maximum (max) attempt. A training one rep max attempt by definition involves very little psychological stimulation. In other words, the lifter doesn’t get “crazy” for the attempt. He or she simply concentrates and handles a very heavy load in a calm state. Training singles should consist primarily of such attempts as excessively psyched max attempts are very draining in general, to the nervous system in particular, and can quickly lead to training stagnation.
A heavy training single is very important to, if not optimal for, the building of maximal strength. The ability to move a near maximal load for one repetition requires neural optimization relative to the specific movement pattern and loading. While multiple repetitions can and do build absolute strength (up to a point), only heavy single attempts can optimally stimulate the adaptation required to maximize absolute strength. This is the S.A.I.D. (Specific Adaptation to Imposed Demand) principle in practice. Human physical adaptation is highly specific and the neural coordination required to move a maximal load through a specific movement pattern can only be peaked with single repetition practice (yes, repeated for emphasis…).
Absolute strength is a combination of neural optimization and the force production capacity of the contractile myofibrils (actin and myosin – the contractile components of skeletal muscle). Maximal individual demonstrable strength is thus achieved via a combination of contractile hypertrophy and neural adaptation. This is the reason for the combination of both heavy singles and moderate and higher repetitions. Moderate reps (4-8 or so) target both maximal strength and hypertrophy while higher reps stimulate what is commonly referred to as non-contractile hypertrophy (hypertrophy of the non-contractile elements of muscle fibers) and the maintenance/hypertrophy of the very important connective tissues. The importance of the repetition blend cannot be overemphasized.
To clarify the force production capacity statement, the contractile components of the muscles cells are known as the aforementioned myofibrils actin and myosin. Individually speaking, the larger the myofibrils the greater the force production capacity, but greater capacity does not automatically equate to greater expressed strength. A automotive analogy is appropriate to illustrate the concept. With an automobile engine and transmission the transmission is required to take the force production capacity of the engine and translate it to the wheels so the car will move. In the body the nervous system is loosely analogous to the automobile transmission and the myofibrils to the engine. The myofibrils need to have the capacity for high force production and the nervous system must orchestrate everything in one of life’s most beautiful symphonies, the symphony of physical expression.
Want the laymen’s translation? If you want to be really strong make your muscles big and practice heavy singles…
Varying Movements and Intensity
Followers of Westside know that exercise variety is one of the cornerstones of the program. Maximum Effort movements are varied weekly by cycling through 3-4 primary movements. Twice per week trainees should approach things a bit differently. The reduced volume dictated by the program changes the paradigm such that repetition of the same movement is beneficial, at least for a longer period of time than with a standard Westside protocol.
Westside switches Max Effort (ME) movements weekly because Louie Simmons’ research led him to the conclusion that it is optimal for the vast majority of those practicing his program. The higher the level the athlete, the less frequently a one rep max attempt can be made for the same movement. In practice, Louie observed that for most of his athletes the same movement one rep max cannot be repeated for more than 2-3 weeks before stagnation occurs. Weekly rotation proved to be superior as it permitted the most consistent progress with a minimization of injuries from overuse as an added benefit.
This brings us back to some specific verbiage I used earlier in this article. I noted the use of the training one rep max/near max. The reason for the inclusion of the “near max” terminology is that with my program the prescribed one rep max attempts differ from those practiced at Westside in that majority of them are lower in intensity. With my program instead of only one max effort weekly for either a bench or squat variation there are two such attempts. The performance of two very heavy singles per week dictates a reduction in intensity when compared to a true training one rep max. In practice I have found that doing so leads to more consistent progress.
Not to confuse the issue, but my program also relies on a degree of autoregulation. Performing two near max singles per week by body part weekly can overwhelm even those with above average recovery ability, so I encourage practitioners of my program to monitor their progress and make adjustments as needed. When I feel that my body is getting too beat up with heavy singles, and or stagnation sets in, I will switch to a higher rep scheme. In most cases only a week or two of less intense work is needed to right the ship.