CrossFit Discussion Board

CrossFit Discussion Board (https://board.crossfit.com/index.php)
-   Technical Support (https://board.crossfit.com/forumdisplay.php?f=20)
-   -   Updating (editing) informational post (https://board.crossfit.com/showthread.php?t=79766)

Eric Huesman 01-10-2013 06:23 PM

Updating (editing) informational post
 
Admin,

I started a thread last week that includes an attachment. The attachment is a chart comparing barbells from some of the more common CrossFit brands.

[url]http://board.crossfit.com/showthread.php?t=79686[/url]

A few of the brands have commented about erroneous information in the chart. A piece of the bad information was wholly my fault and stemmed from me not knowing there was a difference between black zinc and black oxide finishes, so I used the term black oxide for all the black finishes. The other pieces of erroneous information were obtained from the brand's websites and/or from emailing the brands, which sometimes conflicted with themselves or each other.

I would like to update the thread with a corrected chart in the first post. If I am also able to add a note that the information in the chart is correct as of XX/XX/2013, it would prevent the need to continually update the information.

Please let me know if this is possible and I can email someone the corrected chart.

Thanks,

Eric Huesman


All times are GMT -7. The time now is 08:07 PM.


CrossFit is a registered trademark of CrossFit Inc.