CrossFit Discussion Board  

Go Back   CrossFit Discussion Board > CrossFit Forum > Equipment
CrossFit Home Forum Site Rules CrossFit FAQ Search Today's Posts Mark Forums Read

Equipment Outfitting a serious gym. Vendors & suppliers. Devices & equipment

Reply
 
Thread Tools
Old 10-14-2008, 11:49 AM   #1
Sarah M Rodriguez
Member Sarah M Rodriguez is offline
 
Profile:
Join Date: Oct 2008
Location: La Verne  CA
Posts: 8
Olympic Lifting Platform

Hey guys! Just curious if anyone knew how to build an olympic lifting platform into the ground. Or a platform not built into the ground. Like what wood to use, rubber, dimensions etc...

Thanks,

Sarah
  Reply With Quote
Old 10-14-2008, 12:04 PM   #2
Jeff Yan
Member Jeff Yan is offline
 
Jeff Yan's Avatar
 
Profile:
Join Date: Nov 2007
Location: New York City  New York
Posts: 860
Re: Olympic Lifting Platform

start here:
http://www.crossfit.com/cf-info/faq.html#Equipment5
(wfs)
  Reply With Quote
Old 10-14-2008, 06:56 PM   #3
Brian Lawyer
Member Brian Lawyer is offline
 
Profile:
Join Date: Dec 2007
Location: Dallas  TX
Posts: 564
Re: Olympic Lifting Platform

Do a couple google searches with terms like "home made lifting platform" or "home made olympic lifting platform". I saw a few other forums with some guys who put step by step pictures and listed out all the materials they used.
  Reply With Quote
Old 10-14-2008, 08:18 PM   #4
Ahmik Jones
Affiliate Ahmik Jones is offline
 
Ahmik Jones's Avatar
 
Profile:
Join Date: Sep 2005
Location: San Diego  CA
Posts: 506
Re: Olympic Lifting Platform

I have links to plans and pictures in my garage gym shopping list about 3/4 of the way down the page. The link is in my signature.
  Reply With Quote
Old 11-19-2008, 10:45 AM   #5
Brian Hogan
Member Brian Hogan is offline
 
Profile:
Join Date: Nov 2008
Location: Greenville  NC
Posts: 9
Re: Olympic Lifting Platform

Sarah!
If this is a project for the house, building it "into the ground" like you say is probably going to be a bit tougher for the fact that your going to have to concrete glue down the rubber matting or it will be all over the place.
like what some others have already said, just look around for sites with quick instructions.
If I may give you 2 pointers, I would definitely use a harder plywood sheet for the flooring of the platform. My recommendation is an 3/4" oak. No matter what, just stay away from particle board. It looks pretty, but is way to slick and will chip to pieces.
And if you have trouble finding Stall mats or thick rubber sheets around town (like I did) go to http://therubberman.com. They already have 4x6 and 4x8 cuts of 3/4" ready to go and it takes less than a week to get to you. From shopping around online they are pretty reasonably priced too.

good luck!

Last edited by Brian Hogan : 11-19-2008 at 10:51 AM. Reason: adding a link
  Reply With Quote
Old 11-19-2008, 10:25 PM   #6
Skylar Cook
Member Skylar Cook is offline
 
Skylar Cook's Avatar
 
Profile:
Join Date: Jan 2007
Location: Jupiter  FL
Posts: 839
Re: Olympic Lifting Platform

Brian's link is wfs.

Which ones would be the best to order from that site, though? I'm a little nervous since it looks like the mats are made out of the same material as the interlocking foam tiles, which are usually crap. It looks like the 4x6 trailer mat might be the closes to what I have pictured for good stall mats? Inputs or other good sites to order from? I've got funding to set up a CF gym here at Caltech, but I have to order all of the equipment since transportaion (especially with a few big ol' mats) is an issue.
__________________
"If you even dream of beating me you'd better wake up and apologize." -Ali
  Reply With Quote
Old 11-20-2008, 02:55 AM   #7
Gavin Steel
Member Gavin Steel is offline
 
Gavin Steel's Avatar
 
Profile:
Join Date: Jun 2008
Location: Paisley  Strathclyde
Posts: 137
Re: Olympic Lifting Platform

The following is a link for those who lift using iron and dont have bumpers to bounce off of rubber matts........more wood used and more complicated than the usual 3 layer ply/stall matt option.....looks bombproof tho.

http://uk.youtube.com/watch?v=1jSHt5syE20 (w/f/s)
__________________
open your eyes and the mind will follow
  Reply With Quote
Old 11-20-2008, 08:05 AM   #8
Brian Lawyer
Member Brian Lawyer is offline
 
Profile:
Join Date: Dec 2007
Location: Dallas  TX
Posts: 564
Re: Olympic Lifting Platform

I built my platform last weekend. It came out very nice. I made it a 8' x 6', basically shortened it by two feet to match the 4 x 6 horse stall mat I got at TSC. Is anyone putting a coat of polyurethane paint on the top piece of wood, and if so what kind?

I was looking at some store bought/built platforms online and they put a coat of polyurethane for traction. I've been using the platform and don't seem to have any traction issues.
  Reply With Quote
Old 11-20-2008, 08:25 AM   #9
George Mounce
Banned for Ethical and Integrity Violations George Mounce is offline
 
Profile:
Join Date: Mar 2007
Location: Steens  MS
Posts: 3,295
Re: Olympic Lifting Platform

3 pieces of 8' x 4' x 3/4" oak plywood, and two pieces of rubber belt from a huge conveyor (2'x8'x3/4") which were free, and I had one for a great price. Need to sand and finish the top though.

Go find a rubber manufacturing place near you and they would probably give you some big pieces of rubber for free (that's how I got mine).
  Reply With Quote
Old 11-20-2008, 08:52 AM   #10
Aimee Anaya
Member Aimee Anaya is offline
 
Aimee Anaya's Avatar
 
Profile:
Join Date: Apr 2006
Location: Fallbrook  Ca
Posts: 100
Re: Olympic Lifting Platform

horse stall mats and plywood work best.
2 8' x 4' x 3/4" on the very bottom- facing forward side-by-side, 2 more on top of that, facing sideways side-by-side. and one on the very top, facing forward again, right in the middle. Horse stall mats on either side, you will need to by 3 and cut them to fit. The 3rd is used to fill in the empty space since the horse stall mats are not the same size as the wood.

That sounds really confusing, but it is really easy. The first 2 layers are there to protect the ground and your weights/bar.
  Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
olympic platform Josh Brown Equipment 2 08-16-2008 10:45 PM
Lifting Platform Width? Jeff Mouland Equipment 12 01-19-2008 11:06 PM
lifting Platform Chris Henderson Equipment 9 11-05-2007 09:16 PM
Lifting platform necessary? Dan Koloski Equipment 2 12-16-2005 06:58 AM
Lifting platform ? Ed Velasco Equipment 7 12-03-2005 07:59 AM


All times are GMT -7. The time now is 04:56 AM.


Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
CrossFit is a registered trademark of CrossFit Inc.