|05-15-2014, 09:45 AM||#1|
A Quick Lesson on Turf: Selection, Installation, and Marking
Iím noticing a lot of questions on the Boards about Turf:
Given the volume and lack of solid info, I thought Iíd post a quick primer. Here we go:
Types of Turf
You should use padded turf for indoor applications. The pad will cushion the activity, weigh the turf down, and keep noise to a minimum. Unpadded turf is better for outdoor applications.
There are three types of turf, differentiated by yarn type: Nylon, Poly, and Mono. Nylon is extremely durable and extremely expensive. Due to the price point, we don't carry it.
Rather, we offer Poly, which is both affordable and much softer on the hands and body, good for when you are active on the turf: burpees, sit-ups, mobility, agility drills, etc.
The final type, Mono, is much stiffer than either Nylon or Poly, and isnít really suitable for Affiliate applications. There lies the land of "turf burn" (which is super sh*tty, trust me).
There are 3 options for installing turf:
1: Lay it down and do nothing.
We donít recommended this for several reasons: big dudes pushing sleds could cause the turf to curl/bunch up, making it easy to punch a sled runner through it. More importantly, unglued turf voids the manufacturer warranty.
2: Double stick tape around edges and every few feet within the perimeter.
While this allows you to move the turf if you change boxes, itís not as secure as glue and again, the warranty is voided.
3: Glue it down.
We sell the adhesive; it holds turf down really well. Obviously, the installation is bit more work, and nearly permanent, but it keeps the manufacturerís warranty in tact. If you wanted to move the turf, youíd have to scrape it up, which usually damages the padding underneath.
Overall, if you take care of your Poly Turf, glue it down, and alternate sled/drill direction and path, indoor turf can last 6-10 years.
In terms of marking turf, itís easy to spray lines, and much more cost-effective than pre-printed turf. We have access to stencils as well as a paint company that makes the correct formulation.
You can check out our offerings here (https://www.againfaster.com/shop/flooring/, WFS), but regardless of supplier, make sure you are well-versed on product differences and installation options prior to buying.
I hope that helps! Feel free to email me if you specific questions: firstname.lastname@example.org.
"Good intentions are no excuse for incompetence." -Peter Drucker
|Thread||Thread Starter||Forum||Replies||Last Post|
|Color marking black Muscle Driver bumpers?||Steve Agocs||Equipment||1||02-03-2014 11:17 AM|
|First teaching lesson||Michele Venturella||Starting||1||02-03-2013 01:35 AM|
|Marking the High Temps from Rogue||Darla Powell||Equipment||5||09-04-2010 01:47 PM|
|Lesson learned...||Ivan Ruiz||Starting||1||06-18-2009 09:05 AM|
|Marking bumpers?||Matthew Scoble||Equipment||10||01-18-2007 08:46 PM|