CrossFit Discussion Board  

Go Back   CrossFit Discussion Board > CrossFit Forum > Equipment
CrossFit Home Forum Site Rules CrossFit FAQ Search Today's Posts Mark Forums Read

Equipment Outfitting a serious gym. Vendors & suppliers. Devices & equipment

Reply
 
Thread Tools
Old 02-18-2006, 11:14 PM   #1
Mark Garcia
Member Mark Garcia is offline
 
Profile:
Join Date: Feb 2006
Location: paranaque  metro manila
Posts: 155
Just wondering if anyone here has a sketch on how to make these pieces of equipment? A friend of mine told me that there was a handle you can attach to a DB to convert it to a KB. Hope you guys can help me out here. thanks
  Reply With Quote
Old 02-19-2006, 07:48 AM   #2
Peter Queen
Member Peter Queen is offline
 
Peter Queen's Avatar
 
Profile:
Join Date: Jan 2006
Location: Dousman  WI
Posts: 1,567
I do not know if this will help but I posted thread about using some rope which I attached a DB. Here is the link to a recent post that I responded to when someone else was requesting as well as an embedded link to my original post.
http://www.crossfit.com/discus/messages/26/19448.html
  Reply With Quote
Old 02-19-2006, 07:48 AM   #3
Paul Findley
Member Paul Findley is offline
 
Paul Findley's Avatar
 
Profile:
Join Date: Jan 2006
Location: Longmont  CO
Posts: 1,257
I was thinking to making one out of pipe.
I liked the looks of this design, but have not seen it live. I was worried about size & feel.
NYBB
I don't have any of the standard weights though.
There is another handle with flat sheet steel leading down to an axle of sorts. A friend told me not to bother since the plates hit you in a bad way. He just bought a real kettlebell and is much happier. I am not sure of the brand.
I will swing dumbells until I am ready to drop money on a real bonafide kettlebell. Good Luck.

(Message edited by paul on February 19, 2006)
  Reply With Quote
Old 02-19-2006, 07:53 AM   #4
Peter Queen
Member Peter Queen is offline
 
Peter Queen's Avatar
 
Profile:
Join Date: Jan 2006
Location: Dousman  WI
Posts: 1,567
Wow Paul, what are the odds of two people from different parts of the country posting to the same message at the same time on the same day and on a Sunday morning yet?
OOOOOOOH, CREEPY!!:rofl:
  Reply With Quote
Old 02-19-2006, 08:00 AM   #5
Pamela MacElree
Member Pamela MacElree is offline
 
Profile:
Join Date: Feb 2006
Location: Philadelphia  PA
Posts: 46
Mark
If you are going to make a KB, be careful that it is a very secure piece of equiptment since you'll most likely be throwing it overhead.

The same story applies with kettlestacks and kettlegrips. Just be cautious when getting the weight overhead.

All of the KB companies design their KBs slightly different and of course cost different prices. Paul's friend is right if the handle is too long the weight will hit you lower on the forearm and cause discomfort.

We have several different KBs, if you have the oppurtunity to try someone's KBs before you buy that would be your best bet so you for sure which design works best for you.
  Reply With Quote
Old 02-19-2006, 08:54 AM   #6
Lynne Pitts
Administrator Lynne Pitts is offline
 
Lynne Pitts's Avatar
 
Profile:
Join Date: Sep 2003
Location: Richmond  NH
Posts: 3,231
Moving to Equipment.
  Reply With Quote
Old 02-19-2006, 04:32 PM   #7
Adrian Bozman
Affiliate Adrian Bozman is offline
 
Adrian Bozman's Avatar
 
Profile:
Join Date: May 2005
Location: San Francisco  CA
Posts: 252
I made my first few pairs of kettlebells a few years back by using a heavy gauge heater hose, or bent section of PVC pipe sunk into a basketball filled with concrete.

When the concrete sets, peel the basketball off (don't do too much damage to it so you can use it as a mold again later) and apply your favourite stencil with spraypaint.

They usually came out around 25lbs each. Kept me busy for 2 summers before I saved up enough for the real deal.

They make great presents too! If you want more details, just let me know.
  Reply With Quote
Old 02-20-2006, 07:41 PM   #8
Pascal Ol
 
Profile:  
Posts: n/a
Here is a link to the homemade kettlebell i made a year ago. Its the second picture. worked o.k But it can`t compare to a real one .It will give you the feel of kb training but its not half the fun , efficiency and comfort of a real one .

http://geocities.com/briangl2002/kettlebell.htm
  Reply With Quote
Old 02-22-2006, 09:17 AM   #9
Danny Nowell
Member Danny Nowell is offline
 
Profile:
Join Date: Dec 2005
Location: Greenville  NC
Posts: 25
Another variation would be Macy grip olympic plates or any other plat that has the hand grips and using them for various movements.

Would be a different feel than kb/db movements, if anyone gives it a try let me know how it works. I learned the tip after I already sold off my old Macy grip plates.
  Reply With Quote
Old 02-22-2006, 05:43 PM   #10
James R. Climer
Member James R. Climer is offline
 
James R. Climer's Avatar
 
Profile:
Join Date: Jul 2004
Location: Paso Robles  California
Posts: 1,148
The Marcy grip plates work pretty good when you set them up as an unbalanced dumbbell and do two-handed swings, the hand hole is too small for one-handed stuff though, so I made a couple homemade adjustable k'bells. A little different style than those posted. I will attach some pix when I get home.

They suffice for now, until I get back on Santa's 'good boy' list.
  Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Home made dip bar? Jason Billows Equipment 11 04-05-2007 08:49 AM
Home made rings Joe Marsh Equipment 1 02-16-2007 07:58 PM
My Home-made GHD Jim Biancolo Equipment 11 12-05-2005 08:33 PM
Home Made Box Fiona Muxlow Equipment 14 08-03-2005 01:39 PM
Home made bumpers? Hollis Petri Equipment 7 07-12-2005 04:54 PM


All times are GMT -7. The time now is 09:40 PM.


Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
CrossFit is a registered trademark of CrossFit Inc.